EKOLUBE MOTOR Speed

The synergistic combination of solid lubricants PTFE and hBN, in the base oil based on glycol-ester technology, gives the engine oil superior high-pressure, anti-abrasion and lubricity properties, especially in the area of ​​mixed and marginal friction. The balanced combination of PTFE (Teflon®) and hBN (hexagonal boron nitride) is a very effective anti-friction material and is used for extreme lubrication requirements and suppression of the associated negative effects. The synergistic combination of these materials shows much better lubrication and especially high-pressure properties than Teflon (PTFE) alone.

Ekolube Motor Speed ​​significantly reduces passive resistances in the engine, which has a positive effect on fuel consumption.

Ekolube Motor Speed ​​stands out for its low level of wear on lubricated parts under high dynamic load and wherever there are no good conditions for hydrodynamic lubrication.

Ekolube Motor Speed ​​prevents the formation and deposition of carbon and the formation of varnishes, thereby contributing to the cleanliness of the engine.

The use of Ekolube Motor Speed ​​concentrate is suitable for all types of mineral semi-synthetic and synthetic motor oils, optimally in a concentration of 10% (i.e. in a ratio of 1:9) to the volume of the oil filling, every 50,000 km. The concentrate is applied to the engine ideally when changing the engine oil and oil filter or up to a maximum of 1000 km after the oil change.

Benefits of use:

-reducing the wear of all lubricated engine parts by more than 50%
-real decrease in fuel consumption by 5-10%
-noise reduction
-vibration reduction
-reduction of oil fill temperatures
-friction reduction-energy saving
-extending the life of the oil filling
-temporary engine protection in case of sudden oil loss
-regenerates rubber, prevents oil leaks,
-increasing compression, engine power and reducing emissions
-keeps the inside of the engine clean